High-speed multi-wire cutting machine

DZ4-2-9313AK-RS

Category:

Used for cutting various hard and brittle materials such as gemstones, crystals, single crystal silicon, and magnetic materials

Product Introduction

Used for cutting various hard and brittle materials such as gemstones, crystals, single-crystal silicon, and magnetic materials

Product features

Stable cutting speed up to 2000m/min;

Adopts a dual-station configuration, cutting two plates simultaneously;

The body is made of a one-piece cast structure, with high anti-deformation ability and excellent vibration damping performance;

The guard adopts an electric lifting structure, with three sides open for easy operation and maintenance.

Product parameters

Equipment	Product Model	DZ4-2-9313AK-RS
	Number of Workstations	2
	Number of Spindles	4
	Roller Center Distance	315 mm
	Material Plate Dimensions (Length × Width × Height)	930 × 130 × 23.5 mm
	Workpiece Dimensions (Length × Width × Height)	930 × 130 × 160 mm
	Roller Outer Diameter × Rubber Coating Length	Φ178 mm × 930 mm
	Cutting Type	Water-based/Oil-based Cutting Fluid
	Human-Machine Interface Dimensions	15"
	Equipment Dimensions (Length × Width × Height)	2650 × 2580 × 2770 mm (Operating) 3310 × 1690 × 2770 mm (Shipping)
	Motor Cooling Method	Circulating Liquid Cooling
	Total Weight	≈13000 KG
Electrical	Power Supply	Three-phase four-wire AC380V 50Hz
	Total Power	≈130 KW
	Spindle	22 KW × 4
	Wire Feeding and Unwinding	15 KW × 2
	Tension	2.0 KW × 2
	Lifting	0.75 KW × 1
	Wire Discharge	0.40 KW × 2
	Horizontal Movement	-
	Swing	-
	Air Source	≥0.4 MPa
	Cutting System	DELTA
Performance	Cutting Accuracy	±0.02 mm
	Wire Diameter	Ф0.10-0.25 mm
	Wire Storage Capacity	Max 30KM (Ф0.25mm)
	Set Tension	Max 40N
	Lifting Stroke	250 mm
	Horizontal Movement Stroke	-
	Feed Rate	0.1-99.9 mm/min
	Wire Speed	Max 2400 m/min
	Cutting Method	Vertical Upward Feed
	Adjustable Angle of Adjustment Table	-
	Swing Angle	-