Multi-wire saw

KP4-1200

Category:

Used for cutting various hard and brittle materials such as gemstones, crystals, single crystal silicon, marble, and magnetic materials

Product Introduction

Used for cutting various hard and brittle materials such as gemstones, crystals, single crystal silicon, marble, and magnetic materials

Product features

Cast body structure, high anti-deformation ability, excellent vibration damping performance;

Liquid-cooled servo, suitable for high-load scenarios, low vibration and low noise operation, stable temperature, and extended motor life;

The guard adopts an electric lifting structure, with three sides open for easy operation and maintenance.

Product parameters

Equipment	Product Model	KP4-1200
	Number of Workstations	1
	Number of Spindles	4
	Roller Center Distance	1470 mm
	Material Plate Size (Length × Width × Height)	930 × 1200 × 100 mm
	Workpiece Size (Length × Width × Height)	930 × 1200 × 1200 mm (Square) Φ1200 × 930 mm (Cylinder)
	Roller Outer Diameter × Rubber Coating Length	Φ210 mm × 930 mm
	Cutting Type	Water-based/Oil-based Cutting Fluid
	Human-Machine Interface Size	10"
	Equipment Size (Length × Width × Height)	4250 × 6660 × 5000 mm
	Motor Cooling Method	Circulating Liquid Cooling
	Total Weight	≈35000 KG
Electrical	Power Supply	Three-phase four-wire AC380V 50Hz
	Total Power	≈190 KW
	Spindle	30 KW × 4
	Wire Feeding and Winding	15 KW × 2
	Tension	15 KW × 2
	Lifting	3 KW × 2
	Wire Discharge	0.40 KW × 2
	Horizontal Movement	-
	Swing	-
	Air Source	-
	Cutting System	DELTA
Performance	Cutting Accuracy	±0.02 mm
	Wire Diameter	Ф0.12-0.42 mm
	Wire Storage Capacity	Max 50KM (Ф0.42mm)
	Set Tension	Max 155N
	Lifting Stroke	1790 mm
	Horizontal Movement Stroke	-
	Feed Rate	0.1-180 mm/min
	Wire Speed	Max 1500 m/min
	Stable Cutting Wire Speed	1100 m/min
	Cutting Method	Vertical Upward Feed
	Adjustable Angle of Adjustment Table	-
	Swing Angle	-