Multi-wire saw

D3B-1-1853A-RS

Category:

Used for cutting various hard and brittle materials such as gemstones, crystals, single crystal silicon, and magnetic materials

Product Introduction

Used for cutting various hard and brittle materials such as gemstones, crystals, single-crystal silicon, and magnetic materials

Product features

Unibody cast structure, high deformation resistance, excellent vibration damping performance, all stainless steel appearance;

The guard adopts an electric lifting structure, with three sides open for easy operation and maintenance.

Product parameters

Equipment	Product Model	D3B-1-1853A-RS
	Number of Workstations	1
	Number of Spindles	3
	Roller Center Distance	365 mm
	Material Plate Size (Length × Width × Height)	530 × 180 × 20 mm
	Workpiece Size (Length × Width × Height)	530 × 180 × 160 mm
	Roller Outer Diameter × Rubber Coating Length	Φ178 mm × 530 mm
	Cutting Type	Water-based/Oil-based Cutting Fluid
	Human-Machine Interface Size	10"
	Equipment Size (Length × Width × Height)	2180 × 2400 × 2555 mm (Operating) 3000 × 1500 × 2555 mm (Shipping)
	Motor Cooling Method	Forced Air Cooling
	Total Weight	≈7000 KG
Electrical	Power Supply	Three-phase four-wire AC380V 50Hz
	Total Power	≈70 KW
	Spindle	15 KW × 3
	Wire Feeding and Winding	7.5 KW × 2
	Tension	2.3 KW × 2
	Lifting	0.75 KW × 1
	Wire Discharge	0.40 KW × 2
	Horizontal Movement	-
	Swing	1.5 KW × 1
	Air Source	≥0.4 MPa
	Cutting System	XINJE
Performance	Cutting Accuracy	±0.02 mm
	Wire Diameter	Ф0.10-0.25 mm
	Wire Storage Capacity	Max 30KM (Ф0.25mm)
	Set Tension	Max 40N
	Lifting Stroke	270 mm
	Horizontal Movement Stroke	-
	Feed Rate	0.1-99.9 mm/min
	Wire Speed	Max 1000 m/min
	Stable Cutting Wire Speed	800 m/min
	Cutting Method	Vertical Upward Feed
	Adjustable Angle of the Adjustment Table	-
	Swing Angle	±6°