Multi-wire saw

DZ4-2-6218APH-R

Category:

Used for cutting various hard and brittle materials such as gemstones, crystals, single crystal silicon, and magnetic materials

Product Introduction

Used for cutting various hard and brittle materials such as gemstones, crystals, single-crystal silicon, and magnetic materials

Product features

Employing a dual-station configuration, cutting two plates simultaneously;

Unitary cast body structure, high deformation resistance, excellent vibration damping performance, and a full stainless steel exterior;

The guard adopts an electric lifting structure, with three sides open for easy operation and maintenance.

Product parameters

Equipment	Product Model	DZ4-2-6218APH-R
	Number of Workstations	2
	Number of Spindles	4
	Roller Center Distance	380 mm
	Material Plate Size (Length × Width × Height)	620 × 180 × 20 mm
	Workpiece Size (Length × Width × Height)	620 × 180 × 160 mm
	Roller Outer Diameter × Rubber Coating Length	Φ180 mm × 620 mm
	Cutting Type	Water-based/Oil-based Cutting Fluid
	Human-Machine Interface Size	10"
	Equipment Size (Length × Width × Height)	2970 × 1980 × 2590 mm
	Motor Cooling Method	Air Cooling
	Total Weight	≈7500 KG
Electrical	Power Supply	Three-phase four-wire AC380V 50Hz
	Total Power	≈45 KW
	Spindle	7.5 KW × 4
	Wire Feeding and Winding	2.9 KW × 2
	Tension	2.9 KW × 2
	Lifting	0.75 KW × 1
	Wire Discharge	0.40 KW × 2
	Horizontal Movement	0.40 KW × 1
	Swing	-
	Air Source	-
	Cutting System	INOVANCE
Performance	Cutting Accuracy	±0.02 mm
	Wire Diameter	Ф0.12-0.25 mm
	Wire Storage Capacity	Max 30KM (Ф0.25mm)
	Set Tension	Max 40N
	Lifting Stroke	240 mm
	Horizontal Movement Stroke	100 mm
	Feed Rate	0.1-99.9 mm/min
	Wire Speed	Max 1000 m/min
	Stable Cutting Wire Speed	800 m/min
	Cutting Method	Vertical Upward Feed
	Adjustable Angle of the Adjustment Table	3°
	Swing Angle	-