Multi-wire saw

D6-3-2193A-RS

Category:

Used for cutting various hard and brittle materials such as gemstones, crystals, single crystal silicon, and magnetic materials

Product Introduction

Used for cutting various hard and brittle materials such as gemstones, crystals, single-crystal silicon, and magnetic materials

Product features

Utilizing a three-station configuration, cutting three boards simultaneously;

One-piece cast body structure, high anti-deformation capability, excellent vibration damping performance, full stainless steel exterior;

Equipped with a balance protection system to prevent the risk of lifting body falling;

Liquid-cooled servo motor, suitable for high-load scenarios, low vibration and low noise operation, stable temperature, and extended motor life;

The guard adopts an electric lifting structure, with three sides open for easy operation and maintenance.

Product parameters

Equipment	Product Model	D6-3-2193A-RS
	Number of Workstations	3
	Number of Spindles	6
	Roller Center Distance	400 mm
	Single Plate Size (Length × Width × Height)	930 × 210 × 19.5 mm
	Workpiece Size (Length × Width × Height)	930 × 210 × 260 mm
	Roller Outer Diameter × Rubber Coating Length	Φ180 mm × 930 mm
	Cutting Type	Water-based/Oil-based Cutting Fluid
	Human-Machine Interface Size	15"
	Equipment Size (Length × Width × Height)	2620 × 2046 × 3300 mm (Main Unit) 655 × 1100 × 2730 mm (Electrical Cabinet)
	Motor Cooling Method	Liquid Cooling
	Total Weight	≈11000 KG
Electrical	Power Supply	Three-phase four-wire AC380V 50Hz
	Total Power	≈132 KW
	Spindle	15 KW × 6
	Wire Feeding and Unwinding	15 KW × 2
	Tension	2.3 KW × 2
	Lifting	0.75 KW × 1
	Wire Discharge	0.4 KW × 2
	Horizontal Movement	-
	Swing	-
	Air Source	-
	Cutting System	XINJE
Performance	Cutting Accuracy	±0.03 mm
	Wire Diameter	Ф0.10-0.25 mm
	Wire Storage Capacity	Max 30KM (Ф0.25mm)
	Set Tension	Max 40N
	Lifting Stroke	370 mm
	Horizontal Movement Stroke	-
	Feed Rate	0.1-99.9 mm/min
	Wire Speed	Max 1500 m/min
	Cutting Method	Vertical Downward Feed
	Adjustable Angle of the Adjustment Table	-
	Swing Angle	-