Lightweight multi-wire stone cutting machine

DZ4-1-350230AQ-R

Category:

Used for cutting marble rough materials, with high yield and low dust pollution.

Product Introduction

Used for cutting marble rough materials, with high yield and low dust pollution.

Product features

Cutting speed up to 1000m/min;

Lightweight steel structure design, easy to install and maintain;

Product parameters

Equipment	Product Model	DZ4-1-350230AQ-R
	Number of Workstations	1
	Number of Spindles	4
	Roller Center Distance	3800 mm
	Material Plate Dimensions (Length × Width × Height)	-
	Workpiece Dimensions (Length × Width × Height)	2300 × 3500 × 2200 mm
	Roller Outer Diameter × Rubber Coating Length	Φ240 mm × 2320 mm
	Cutting Type	Water
	Human-Machine Interface Dimensions	15"
	Equipment Dimensions (Length × Width × Height)	5570 × 9030 × 6740 mm
	Motor Cooling Method	Forced Air Cooling
	Total Weight	≈000 KG
Electrical	Power Supply	Three-phase four-wire AC380V 50Hz
	Total Power	≈185 KW
	Spindle	30 KW × 4
	Wire Feeding and Unwinding	15 KW × 2
	Tension	7.5 KW × 2
	Lifting	7.5 KW × 2
	Wire Discharge	0.40 KW × 2
	Horizontal Movement	-
	Swing	-
	Air Source	-
	Cutting System	DELTA
Performance	Cutting Accuracy	±0.10 mm
	Wire Diameter	Ф0.37-0.65 mm
	Wire Storage Capacity	Max 50KM (Ф0.45mm)
	Set Tension	Max 155N
	Lifting Stroke	2450 mm
	Horizontal Movement Stroke	50 mm
	Feed Rate	0.1-300 mm/min
	Wire Speed	Max 1000 m/min
	Cutting Method	Vertical Downward Feed
	Adjustable Angle of the Adjustment Table	-
	Swing Angle	-