Home page

High-speed, high-frequency, oscillating multi-wire cutting machine

DZ4-1-350230ABM-M

Category:

Stone cutting machine

Used for cutting stone materials such as marble, with high yield.

+8619803151250

yuzhenpeng@bokejinghui.com

Inquire Now

Down

Product Introduction

Used for cutting marble and other stone materials, with high yield.

Product features

Stable cutting speed up to 2000m/min, uniquely designed mechanical vibration to create high-frequency vibration of the cutting line, clearing cutting residue and maintaining cutting force;

The machine body is made of a full cast structure, with high anti-deformation ability and excellent vibration damping performance;

The wire mesh has a swing mechanism for swing cutting, reducing cutting time;

Liquid-cooled servo, suitable for high-load scenarios, low vibration and low noise operation, good temperature uniformity extends motor life;

Uses a large torque servo motor to control tension, with an adjustment accuracy of ±1N;

Reduces the number of guide wheels between the wire feeding and winding and rollers, saving consumables;

Equipped with a power-off uninterrupted wire system, which can effectively avoid the generation of defective products due to power failure and improve the yield rate;

Energy recovery unit, reducing energy consumption and saving costs.

Product parameters

Equipment	Product Model	DZ4-1-350230ABM-M
	Number of Workstations	1
	Number of Spindles	4
	Roller Center Distance	3860 mm
	Material Plate Size (Length × Width × Height)	-
	Workpiece Size (Length × Width × Height)	2300 × 3500 × 2200 mm
	Roller Outer Diameter × Rubber Coating Length	Φ320 mm × 2320 mm
	Cutting Type	Water
	Human-Machine Interface Size	15"
	Equipment Size (Length × Width × Height)	6200 × 8900 × 7000 mm
	Motor Cooling Method	Forced Air Cooling
	Total Weight	≈50000 KG
Electrical	Power Supply	Three-phase four-wire AC380V 50Hz
	Total Power	≈320 KW
	Spindle	55 KW × 4
	Wire Feeding and Unwinding	30 KW × 2
	Tension	15 KW × 2
	Lifting	7.5 KW × 4
	Wire Discharge	0.40 KW × 2
	Horizontal Movement	-
	Swing	7.5 KW × 2
	Air Source	-
	Cutting System	DELTA
Performance	Cutting Accuracy	±0.10 mm
	Wire Diameter	Ф0.37-0.95 mm
	Wire Storage Capacity	Max 50KM (Ф0.45mm)
	Set Tension	Max 500N
	Lifting Stroke	2640 mm
	Horizontal Movement Stroke	-
	Feed Rate	0.1-300 mm/min
	Wire Speed	Max 2400 m/min
	Cutting Method	Vertical Upward Feed
	Stable Cutting Wire Speed	2000 m/min
	Adjustable Angle of the Adjustment Table	-
	Swing Angle	-