Multi-wire saw

DZ4-1-7372A-R

Category:

Used for cutting various hard and brittle materials such as gemstones, crystals, single crystal silicon, and magnetic materials

Product Introduction

Used for cutting various hard and brittle materials such as gemstones, crystals, single-crystal silicon, and magnetic materials

Product features

Cast body structure, high anti-deformation ability, excellent vibration damping performance;

Liquid-cooled servo, suitable for high-load scenarios, low vibration and low noise operation, stable temperature, and extended motor life;

The operating room is open on three sides for easy operation and maintenance.

Product parameters

Equipment	Product Model	DZ4-1-7372A-R
	Number of Workstations	1
	Number of Spindles	4
	Roller Center Distance	900 mm
	Material Plate Size (Length × Width × Height)	730 × 720 × 25 mm
	Workpiece Size (Length × Width × Height)	730 × 720 × 720 mm (Square) Φ750 × 730 mm (Cylinder)
	Roller Outer Diameter × Rubber Coating Length	Φ155 mm × 730 mm (Square) Φ140 mm × 730 mm (Cylinder)
	Cutting Type	Water-based/Oil-based Cutting Fluid
	Human-Machine Interface Size	10"
	Equipment Size (Length × Width × Height)	3280 × 2740 × 4350 mm
	Motor Cooling Method	Forced Air Cooling
	Total Weight	≈15000 KG
Electrical	Power Supply	Three-phase four-wire AC380V 50Hz
	Total Power	≈100 KW
	Spindle	15 KW × 4
	Wire Feeding and Unwinding	7.5 KW × 2
	Tension	7.5 KW × 2
	Lifting	2.3 KW × 1
	Wire Discharge	0.75 KW × 2
	Horizontal Movement	-
	Swing	-
	Air Source	-
	Cutting System	XINJE
Performance	Cutting Accuracy	±0.05 mm
	Wire Diameter	Ф0.10-0.25 mm
	Wire Storage Capacity	Max 30KM (Ф0.25mm)
	Set Tension	Max 70N
	Lifting Stroke	800 mm
	Horizontal Movement Stroke	-
	Feed Rate	0.1-99.9 mm/min
	Wire Speed	Max 800 m/min
	Cutting Method	Vertical Upward Feed
	Adjustable Angle of the Adjustment Table	-
	Swing Angle	-