Reverse multi-wire saw

D4-1-43120A-R

Category:

Used for cutting various hard and brittle materials such as quartz crystals and optical glass into slices

Product Introduction

Used for cutting various hard and brittle materials into thin slices, such as quartz crystals and optical glass

Product features

Cast body structure, high anti-deformation ability, excellent vibration damping performance;

Equipped with a balance protection system to prevent the risk of lifting body falling;

Liquid-cooled servo, suitable for high-load scenarios, low vibration and low noise operation, stable temperature, and extended motor life;

The guard adopts a double-door structure, 180° fully open, convenient for operation and maintenance.

Product parameters

Equipment	Product Model	D4-1-43120A-R
	Number of Workstations	1
	Number of Spindles	4
	Roller Center Distance	1650 mm
	Material Plate Size (Length × Width × Height)	430 × 1200 × 100 mm
	Workpiece Size (Length × Width × Height)	430 × 1200 × 1600 mm (Square)
	Roller Outer Diameter × Rubber Coating Length	Φ210 mm × 430 mm
	Cutting Type	Water-based/Oil-based Cutting Fluid
	Human-Machine Interface Size	10"
	Equipment Size (Length × Width × Height)	3250 × 3250 × 5200 mm
	Motor Cooling Method	Circulating Liquid Cooling
	Total Weight	≈32000 KG
Electrical	Power Supply	Three-phase four-wire AC380V 50Hz
	Total Power	≈160 KW
	Spindle	20 KW × 4
	Wire Feeding and Winding	20 KW × 2
	Tension	15 KW × 2
	Lifting	7.5 KW × 1
	Wire Discharge	0.40 KW × 2
	Horizontal Movement	-
	Swing	-
	Air Source	-
	Cutting System	DELTA
Performance	Cutting Accuracy	±0.2 mm
	Wire Diameter	Ф0.12-0.42 mm
	Wire Storage Capacity	Max 50KM (Ф0.25mm)
	Set Tension	Max 155N
	Lifting Stroke	1790 mm
	Horizontal Movement Stroke	-
	Feed Rate	0.1-180 mm/min
	Wire Speed	Max 1200 m/min
	Stable Cutting Wire Speed	1100 m/min
	Cutting Method	Vertical Downward Feed
	Adjustable Angle of Adjustment Table	-
	Swing Angle	-